Reducing press time is one of the most effective ways t […]
Reducing press time is one of the most effective ways to increase press efficiency. If we make 20 orders per press per day, each time the order is changed to 20 minutes, then each press will be replaced for up to 400 minutes a day. If you can change the order in just 10 minutes, you can save 200 minutes directly, and the efficiency will increase by 50%.
In order to do this, we need to arrange a series of work from pre-printing preparation to on-site commissioning and personnel division. Only by increasing the operating rate of the device can the goal of achieving an efficiency increase of 50%!
Collect ink and check whether the pH, viscosity and hue of the ink meet the standard. Because PH value controls the adsorption of paper on paper, especially the dot overprinting is the most prominent. If your PH value is adjusted, the previous red PH value is set to 9 and the back overprint color blue PH value is set to 8, so the effect of overprinting is that the blue cover cannot be red, and the overprint effect will be poor.
. The same viscosity is one of the most important factors in controlling the printing quality. If the viscosity is too high, there will be unclear printing and deinking, so it must be detected. If the hue is not checked, if the ink is found to be incorrect, then the ink will be lost, and 2 kg of ink will be lost and the ink will be replaced for at least 15 minutes. After reviewing the print production schedule, arrange for the person to take the ink that needs to be used that day and place it in the on-site workshop. Stir the ink before going to the machine, then apply the ink on the cycle.